Polyend Tracker+ - 13.9 USB Storage

323
Polyend Tracker+ Manual
System
13
NOTES
13.9 USB Storage
The SD card can be extracted and used in a Mac or PC for le transfers. In
addition, Tracker+ allows direct access to the SD card while inserted on
board the Tracker+ Device using a USB connection. This is set in the
Cong menu options.
▌ ACCESSING THE SD STORAGE OVER USB.
1. Ensure the PC / Mac is connected to the Tracker+ with a USB data
cable. Ensure the cable is data compatible and not just a power supply
USB cable. It is recommended to connect directly between the Tracker+
and the PC / Mac so ensure the Tracker+ can also be power from the
PC / Mac.
2. Ensure the Tracker+ has the SD card inserted and is Powered on.
3. Press [Cong] for the conguration settings.
4. Press [Up] or [Down], 1
st
& 2
nd
Screen buttons to navigate to the ‘USB’
menu. The arrow keys and (Jog) can also used when navigating in the
left main menu list.
5. In the central window pane, Press [Up] or [Down] Screen buttons to
navigate to the ‘USB Storage’ option. The arrow keys can be used to
navigate to the central pane and scroll the options.
6. Press [Enter], Screen button. The Tracker+ will switch to ‘USB Storage
Mode’ and a warning presented to ensure power is retained in this
mode and during data transfer.
7. The PC or Mac le browsers will see the Tracker+ as an external
device. This allows les or samples to be transferred and data to be
backed up to / from the SD Card.
8. To exit this mode, Press [Back], Screen button. The Tracker+ will switch
back to normal operating mode.