214
Polyend Tracker+ Manual
NOTES
Audio
8
8.3 Audio Inputs
Tracker+ has two audio inputs that provide a source to sampling and
recording from external sources. The physical inputs are located on the rear
of the device and provide access for microphone and line in either using
TRS Stereo or TS Mono jacks or the supplied 3.5mm to 2 x 6.3mm adapter.
Line Input
The input can be selected between Left, Right or Stereo. While these are
selectable options Tracker+ records in mono. Tracker+ can record audio or
play a pattern audio but not both together at the same time. Playing
patterns will therefore output MIDI but not audio if sample recording is in
progress.
Left
Line In Out
Mic In
FM Radio
Right
Stereo
Stereo Stereo
[Sample Recorder]
All Samples are Recorded in Mono
[Master]
Global Mixer - Page 3 of 3
Line In
Mute On / Off
Send FX
Gain
R
M
Delay Reverb
Monitor On / Off
SD Card Instrument List
Master Output
Page 1 of 3
Line In Pass Through
Recording
Audio saved to SD Card and / or
directly to the instrument list
To Next Page
Loading...
