Polyend Tracker+ - Page 305

305
Polyend Tracker+ Manual
Performance Mode
12
▌ SETTING A TRACK PATTERN
1. Playback stopped.
2. Press [Perform] to select the Performance Mode page.
3. Hold [Track 1] to [Track 8] Screen button + Turn (Jog). This selects the
pattern assigned to the chosen track. These can also be changed
during playback as a real-time performance and remix technique.
▌ CHANGING PERFORM TEMPLATE SAVE BEHAVIOUR
1. Press [Cong] to open the project conguration menu.
2. Ensure the left window is highlighted red i.e. in focus. Navigate windows
by pressing [Left] or [Right]. Menu windows will automatically be
selected when pressing the relevant screen keys below the window to
navigate [Up] or [Down].
3. Press [Up] [Down] or Turn (Jog) to highlight with the bounding box the
‘Project Settings’ option. Alternatively press the relevant screen keys
below the left window to navigate [Up] or [Down].
4. Press [Up] [Down] or Turn (Jog) to highlight with the bounding box over
the ‘Performance preset’ option in the central window. Alternatively
press the relevant screen keys below the central window to navigate
[Up] or [Down].
5. To change the selected parameter / setting, Press [Change]. The
parameter pop-up window listing the available options will appear.
6. Turn (Jog) or Press [Up] / [Down] or [Up] / [Down] Screen buttons to
highlight the desired option. The ‘Global’ setting will save the perform
template for all projects while ‘Per Project’ will save on an individual
project basis. Global is default.
7. Press [Apply] - 6
th
Screen button to conrm selection or [Cancel] - 3
rd
Screen button to exit without changing.
NOTES