Polygroup SUMMER WAVES SKIMMERPLUS F400C

To Next Page

Should you encounter a problem with your Polygroup

Product, please DO NOT return the product to the place of purchase. All warranty claims must

be made directly to Polygroup

. For any setup and troubleshooting issues, please visit support.polygroupstore.com. Customer Service: +1 (888) 919-0070

You may be asked to return all or part of the product for inspection and/or repair. Do not return any product to Polygroup

without a Return

Merchandise Authorization number.

DO NOT RETURN PRODUCT TO STORE

For answers to common questions, setup videos and

troubleshooting tips, please visit support.polygroupstore.com

or call Customer Service: +1 (888) 919-0070

To order parts and accessories,

please visit

www.polygroupstore.com

READ AND KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE

DISTRIBUTED BY: Polygroup

Trading Limited Unit 606, 6th Floor, Fairmont House, No.8 Cotton Tree Drive, Central, Hong Kong

Should you encounter any problems, contact Customer Service at +1 (888) 919-0070 from 8AM to 5PM MST, Monday-Friday.

Extended operating days and hours during peak season requirements.

OWNER’S MANUAL

SUMMER WAVES

SKIMMERPLUS

FILTER PUMP

FOR ABOVE GROUND SWIMMING POOLS

SFS350 / SFS400 models

09C3A4USA116

Main Page

Need help?

Do you have a question about the Polygroup SUMMER WAVES SKIMMERPLUS F400C and is the answer not in the manual?

This document is an owner's manual for the Polygroup® Summer Waves® SkimmerPlus® Filter Pump, specifically for models SFS350 and SFS400. It provides comprehensive information on the device's function, technical specifications, usage, and maintenance.

Function Description:

The SkimmerPlus® Filter Pump is an electrical circulation system designed for above-ground/on-ground residential swimming pools. Its primary function is to filter pool water, removing debris and maintaining water clarity. The system integrates a skimmer canister, a filter cartridge, and a pump motor assembly to draw water from the pool surface, filter it, and return clean water to the pool. It is intended for use with storable pools, meaning pools that can be readily disassembled for storage and reassembled. The filter pump is crucial for maintaining proper water hygiene and works in conjunction with pool chemicals to prevent algae growth and ensure safe swimming conditions.

Important Technical Specifications:

The manual provides specific power information for the two models:

SFS350 Filter System:
- Wattage: 20 Watts
- Amperage: 0.35 Amps
SFS400 Filter System:
- Wattage: 25 Watts
- Amperage: 0.4 Amps

Both models are manufactured by Polygroup® and have ETL control numbers 4000608 and 4006317. They are double insulated and grounded, operating on 120 Volts A.C. - 60 Hz. The units require a minimum of 105 Volts A.C. to start and run properly. The system incorporates a ground-fault circuit-interrupter (GFCI) for electrical safety, which is a critical component for preventing electric shock. The filter cartridge is patented under system #7,005,062.

Usage Features:

The manual outlines detailed setup instructions, emphasizing safety and proper assembly.

Installation: The filter pump is designed to be installed on the pool wall, with the skimmer canister positioned to draw water from the pool surface. It involves securing the faceplate and skimmer canister to the pool wall using screws and gaskets, connecting hoses, and ensuring all fittings are properly sealed. Petroleum jelly is recommended for lubricating gaskets to ensure a watertight seal.
Operation: To operate the pump, the GFCI power cord set must be plugged into a grounded receptacle at least 15 feet (4.5m) away from the pool. The pump is turned on by pressing the "RESET" button on the GFCI. The manual warns against using extension cords and advises providing a properly located outlet.
Motor Protection: The pump includes a thermal switch that protects the motor from overheating. If the motor gets too hot, the switch will stop the pump from running until it cools off. Users are instructed to press the reset button on the GFCI if the pump has cooled down. This automatic shut-off feature is a safety measure to prevent pump damage and prolong its lifespan. If the pump frequently stops, users should check the water flow and correct it, as reduced water flow can cause overheating.
Water Circulation: The return fitting diverter allows for adjustment of water flow direction to optimize pool circulation.
Safety Warnings: The manual includes extensive safety warnings, such as preventing drowning (supervising children, emptying pool when not in use), avoiding diving in shallow water, not sitting or laying over the pool wall, and avoiding entrapment by drains and suction fittings. It also highlights electrical safety, advising against placing the pool near overhead electrical lines and keeping electrical appliances away from the pool. Customers are advised to check local and state laws regarding fencing and other safety requirements for pools.

Maintenance Features:

Regular maintenance is crucial for the longevity and efficient operation of the SkimmerPlus® Filter Pump.

Filter Cartridge Care: The filter cartridge (Item 8) is the core of the filtration system. It should be cleaned regularly, ideally every few days or more frequently with heavy use. Cleaning involves removing the skimmer lock top (Item 10) and skimmer strainer basket (Item 9), then taking out the filter cartridge and rinsing it thoroughly with a garden hose. The manual explicitly warns against using powdered chlorine, shock treatment, or other chemicals directly in the product, as this can damage the pump, filter cartridge, and pool.
Pool Water Care: The manual stresses the importance of maintaining proper chlorine and pH levels daily.
- Recommended pH level: between 7.3 and 7.8
- Recommended chlorine level: between 1.0 ppm and 1.6 ppm
- Superchlorination is recommended every other week, or more frequently during hot weather and heavy use.
- Using a pool and/or solar cover can help maintain pH and chlorine levels by reducing evaporation.
- Users are warned against high chlorine concentration and low pH levels, which can damage the pool/liner.
- Lumps or pellets of chemicals should never be dropped directly into the pool.
Pump Disassembly & Storage: Instructions are provided for disassembling the pump for storage or servicing. This involves unplugging the GFCI, removing the skimmer lock top, strainer basket, and filter cartridge, then detaching the pump motor assembly and hoses. All parts should be cleaned, dried, and stored in a dry environment that remains above 32 degrees Fahrenheit.
Troubleshooting: A detailed troubleshooting guide helps users identify and resolve common issues, such as the motor failing to start, low water flow, and dirty filter. It provides symptoms, potential problems, and possible solutions.
Rotor Inspection and Replacement: Instructions are included for inspecting and replacing the rotor assembly, which is a critical internal component of the pump motor. This involves removing the volute housing, checking the rotor shaft, magnet axle, and impeller for damage, and carefully reassembling the unit. Replacement parts can be ordered from polygroupstore.com.
Service Plugs: The manual notes that service plugs (Item 28) should only be installed when servicing the system, likely to prevent water leakage during maintenance.

The manual also lists various organizations related to pool safety and standards, such as ASME, NSPI, UL, NSF, ASTM, and NEC, encouraging users to consult their publications for additional safety information.