To Next PageTo Next Page
Need help?Do you have a question about the Polygroup SUMMER WAVES SKIMMERPLUS SFS350 and is the answer not in the manual?
General| Brand | Polygroup |
|---|---|
| Model | SUMMER WAVES SKIMMERPLUS SFS350 |
| Category | Water Pump |
| Language | English |
Guidance on supervising children, especially those under five, to prevent drowning.
Importance of pool barriers to protect against drowning and near drowning, checking local laws.
Guidelines for electrical equipment near pools, compliance with electrical codes.
Warnings and precautions regarding electric shock and proper use of the filter pump.
Instructions for positioning and operating circulation system components and pumps.
Safety advice on maintaining pool water clarity, pH, and chlorine levels.
Dangers of entrapment by suction fittings and necessary precautions.
Preventing drowning through supervision, barriers, and pool access control.
Precautions against electrocution from electrical equipment near the pool.
Recommendations for having a phone and CPR certification available for emergencies.
Warnings about assembly conditions, weather, and storing the pump.
Further safety advice on supervision, electrical safety, alcohol, and pump placement.
Resources for pool safety information and consumer awareness booklets.
Information on available safety education programs and materials from APSP.
Positioning of circulation equipment to prevent child access.
Importance of barriers for drowning prevention, not a substitute for supervision.
References to publications on pool safety risks and accident prevention.
Positioning components to prevent child access to the pool.
Instructions for understanding assembly requirements and checking parts before starting.
Key considerations for installers, electrical code compliance, and chlorine dispenser use.
Details on wattage and amperage for SFS350 and SFS400 filter pump models.
A comprehensive list of all included parts with their corresponding item numbers.
Steps for setting up the pool and locating skimmer and inlet openings before pump installation.
Instructions for assembling the skimmer canister, faceplate, and ensuring a watertight seal.
Guidance on lubricating and attaching the pump motor assembly to the skimmer canister.
Steps for installing the pool wall fitting, return fitting, and connecting the return hose.
Steps for placing the filter cartridge, strainer basket, and weir into the skimmer canister.
Instructions on filling the pool to the correct water level and adjusting the return fitting.
Procedure for turning the pump on and off using the GFCI reset and test buttons.
Explanation of the thermal switch protection and how to restart the pump.
Detailed instructions for cleaning and maintaining the filter cartridge for optimal performance.
Daily checks for pH, chlorine, flow rate, and leaks, plus recommended pump run times.
Essential items and procedures for maintaining clean and healthy pool water.
Steps for taking apart the pump for cleaning, maintenance, or seasonal storage.
Detailed procedure for removing the pump from the skimmer system for inspection or repair.
Guidance on inspecting the rotor assembly for damage and ensuring proper seating.
Steps for replacing the rotor assembly and reassembling the pump motor.
Troubleshooting steps for motor failure to start or kicking on and off.
Resolving problems with low flow, cloudy water, and filter cleaning.
Diagnosing and fixing water leaks in the hose area, pump connection, or housing inlet.
A detailed table of replacement parts for SFS350/F350C and SFS400/F400C models.
