5
UFH8ZMP
II. Description of the device
UFH8ZMP wiring centre is intended for wireless control of the valves (see: Wireless
communication). The controller enables signifi cant energy saving due to precise
temperature management in particular rooms. Due to advanced software, the controller
fulfi ls a wide range of functions:
• controlling thermostatic actuators 230V
• controlling the pump ( 230V input)
• voltage-free contact intended for controlling e.g. the heating device
• possibility of connecting Internet modules which allow the user to adjust certain
functions and view certain parameters via the Internet
• controlling 8 temperature sensors (placed in separate heating zones
Controller dimensions
II.a) Principle of operation
Controller decides if a given zone needs to be heated on the basis of current temperature
value sent by the room sensor or the room regulator as well as the individual operation
algorithm of the zone.
If heating is necessary, controller opens the valve and activates the pump and the
additional contact which may be used e.g. for controlling the heating device.
Each zone should be assigned wired valve actuators.
.
To Next Page
Loading...
