Polypipe UFH8ZMP - Wireless Communication

13
UFH8ZMP
IV. Wireless communication
It is possible to establish wireless communication between UFH8ZMP external controller
and certain devices:
Function Confi guration
UFHSENSEWP
– room
temperature
sensor
- sending current zone
temperature
The sensor must
be registered in a
given zone.
UFHBOOSTWP
– room
regulator
- sending current zone
temperature
- possibility of changing the
pre-set temperature directly
from the zone
The room
regulator must
be registered
in the external
controller.
UFHTFT
– room
regulator
- sending current zone
temperature
- possibility of adjusting the
pre-set temperature and the
schedule settings directly
from the zone
The room
regulator must
be registered
in the external
controller.
UFHTFTM –
master room
regulator
- sending current zone
temperature
- possibility of adjusting the
pre-set temperature and the
schedule settings directly
from the zone
- possibility of adjusting
settings for other zones
The room
regulator must
be registered
in the external
controller.