Introduction
The LS-Series Compact Chiller provides cooling power for demanding applications and serves as an
economical alternative to tap water cooling systems. It features a microprocessor-based controller, digital
temperature display (°C or °F), and simple operation and maintenance.
To optimize cooling efficiency and performance, this sophisticated Chiller also features a modulated
refrigeration system. As a result, temperature stability is greatly enhanced and compressor life extended.
The Chiller is equipped with either a magnetic drive centrifugal pump or a turbine pump. Wetted parts within
the recirculation system are brass, copper, stainless steel, EPDM rubber, Alcryn, nylon, PVC, and
polyethylene.
General Information
General Safety Information
When installed, operated, and maintained according to the directions in this manual and common safety
procedures, your Chiller should provide safe and reliable heat removal. Please ensure that all individuals
involved in the installation, operation, or maintenance of this unit read this manual thoroughly prior to working
with the unit.
This symbol alerts you to wide range of potential dangers.
This symbol advises you of danger from electricity or electric shock.
This symbol marks information that is particularly important.
This symbol indicates alternating current.
/
These symbols on the Power Switch / Circuit Breaker indicate that they place the main power supply ON /
OFF.
This symbol on the Power Switch indicates that it places the unit in a standby mode. It DOES NOT fully
disconnect the unit from the power supply.
This symbol indicates a protective conductor terminal.
Read all instructions pertaining to safety, set-up, and operation.
Proper operation and maintenance is the user’s responsibility.
2
110-445
To Next Page
General
