Polytec PSV 300 - Page 100



       
LED POWERLED POWER
on the junction on the junction box model -Fbox model -F, -U, -U
3-93-9
on the junction box model -Hon the junction box model -H
3-83-8
LED POWER and HDD, on the workstationLED POWER and HDD, on the workstation
3-123-12
LED, on the controllerLED, on the controller
LLOLLO
3-43-4
OVEROVER
3-43-4
POWERPOWER
3-33-3
REMOTEREMOTE
3-43-4
lens, video cameralens, video camera 7-87-8
level measurement, of the input signallevel measurement, of the input signal C-2C-2
limitation, of the bandwidthlimitation, of the bandwidth C-2C-2
linearity error, max.linearity error, max. 7-37-3
LLO, LED on the controllerLLO, LED on the controller 3-43-4
load capacity, interfaces junction boxload capacity, interfaces junction box 7-67-6
load max., pan-tilt stageload max., pan-tilt stage 7-117-11
load resistance, interfaces junction boxload resistance, interfaces junction box 7-67-6
load resistance, min.load resistance, min. 7-27-2
lock, in the front flap on the workstationlock, in the front flap on the workstation 3-133-13
low pass filterlow pass filter
set in the controllerset in the controller 5-125-12
suitably settingsuitably setting 4-24-2
technical specificationtechnical specification 7-17-1
theory, descriptiontheory, description C-5C-5
low pass filter, suitably settinglow pass filter, suitably setting
for PSV model -F, -Ufor PSV model -F, -U
4-54-5
for PSV model -Hfor PSV model -H
4-34-3

Mach-Zehnder interferometerMach-Zehnder interferometer B-2B-2
main connector, on the scanning headmain connector, on the scanning head 3-83-8
mains connectionmains connection 3-13-1
cablingcabling 3-273-27
on the controlleron the controller 3-53-5
on the junction boxon the junction box 3-113-11
on the workstation on the workstation model -Fmodel -F, -U, -U 3-153-15
on the workstation model -Hon the workstation model -H 3-133-13
mains switch, on the controllermains switch, on the controller
3-33-3
mains voltagemains voltage
controllercontroller 7-17-1
junction boxjunction box 7-57-5
workstationworkstation 7-107-10
maintenance requirementsmaintenance requirements
3-13-1
malfunctionsmalfunctions
6-16-1
maxima of visibilitymaxima of visibility
4-94-9,, 7-77-7
measurement procedure, basicsmeasurement procedure, basics
B-1B-1
measurement rangemeasurement range
set in the controllerset in the controller
5-125-12
suitably settingsuitably setting
4-24-2
technical specificationtechnical specification
7-27-2
measurementsmeasurements
makingmaking 4-14-1
setupsetup
4-14-1
switching onswitching on 4-14-1
measuringmeasuring 4-14-1
menu in the controllermenu in the controller
CONFIGCONFIG
5-115-11
FOCUSFOCUS
5-125-12
INTROINTRO
5-115-11
SETTINGSSETTINGS
5-125-12
micro scan lensesmicro scan lenses
assemblyassembly
A-4A-4
fiber optical ring lightfiber optical ring light
A-5A-5
for the close-up unitfor the close-up unit
A-4A-4
stand-off distances, scan fieldsstand-off distances, scan fields A-4A-4
mixing frequencymixing frequency C-4C-4
models, summarymodels, summary 2-22-2
MONITOR, connectorMONITOR, connector
on the workstation on the workstation model -Fmodel -F, -U, -U 3-163-16
on the workstation model -Hon the workstation model -H 3-143-14
mounting holes, for the coaxial unitmounting holes, for the coaxial unit 3-63-6
MOUSE, connectorMOUSE, connector
on the workstation on the workstation model -Fmodel -F, -U, -U 3-153-15
on the workstation model -Hon the workstation model -H 3-143-14

network, connectornetwork, connector
on the workstation on the workstation model -Fmodel -F, -U, -U
3-153-15
on the workstation model -Hon the workstation model -H
3-143-14
no laser beam, test on fault diagnosisno laser beam, test on fault diagnosis
6-26-2
no velocity signal, test on fault diagnosisno velocity signal, test on fault diagnosis
6-36-3

opening up, the equipmentopening up, the equipment 3-23-2
operatingoperating
controller without softwarecontroller without software 5-95-9
dust cover on the scanning headdust cover on the scanning head 5-25-2
requirementsrequirements 3-13-1
temperaturetemperature 3-13-1
operating system, workstationoperating system, workstation 7-107-10
operating temperatureoperating temperature
controllercontroller
7-17-1
junction boxjunction box
7-57-5
pan-tilt stagepan-tilt stage
7-117-11
scanning headscanning head
7-77-7
optical configuration, in the scanning headoptical configuration, in the scanning head
B-2B-2
optimal stand-off distancesoptimal stand-off distances
4-94-9
optimizing, focus of the laser beamoptimizing, focus of the laser beam
5-45-4
OPTION, jacks on the junction boxOPTION, jacks on the junction box
3-113-11
organization of the menus, in the controllerorganization of the menus, in the controller
5-105-10
oscillator sectionoscillator section C-4C-4
OUT1, OUT2OUT1, OUT2
jack on the junction box model -Hjack on the junction box model -H 3-93-9
output current, interfaces junction boxoutput current, interfaces junction box 7-67-6
output impedanceoutput impedance 7-27-2
output impedance, interfaces junction boxoutput impedance, interfaces junction box 7-67-6
output signal, testingoutput signal, testing 6-36-3
output swingoutput swing
7-27-2
output voltage swing, interfaces junction boxoutput voltage swing, interfaces junction box 7-67-6
output voltage, interfaces junction boxoutput voltage, interfaces junction box 7-67-6