interface (7-pin circular jack)interface (7-pin circular jack)
Interface for the optional hand set Interface for the optional hand set OFV-310 to focus the laser beam OFV-310 to focus the laser beam (refer(refer
totosec
sectiotionn A.A.33))
External decoder interfaceExternal decoder interface
(optional)(optional)
Interface for an Interface for an external digital displacement decoderexternal digital displacement decoder
On the underside of the scanning head, there is a 4-pin circular jack for theOn the underside of the scanning head, there is a 4-pin circular jack for the
cable to the optional pan-tilt stage PSV-Z-017.cable to the optional pan-tilt stage PSV-Z-017.
The front panel of the scanning head is shown inThe front panel of the scanning head is shown infi
figugurere 3.3.33..
ConnectorConnector for the hand set PSV-Z-051for the hand set PSV-Z-051
(12-p(12-pinin circcircular connectular connector)or)
The hand set is used for The hand set is used for focusing and positioning the laser beam (refer tofocusing and positioning the laser beam (refer to
sec
sectiotionn 5.65.6andandsecsectiotionn 5.85.8).).
Mounting holes for the oMounting holes for the optionalptional OFV-056-COFV-056-C
The optional coaxial unit The optional coaxial unit is used for is used for scanning small parts at short distancescanning small parts at short distance
(refer to(refer tose
sectctionion A.1A.1).).
front lensfront lens
The video camera is The video camera is controlled via the software as described in yourcontrolled via the software as described in your
software manual.software manual.
Figure 3.3: Front view of the scanning headFigure 3.3: Front view of the scanning head
To Next Page
Loading...
