Polytec PSV 300 - Page 18


  
                 
 Beam shutterBeam shutter   
In position OFF the laser beam is blocked.In position OFF the laser beam is blocked.

   


   (industrial-s(industrial-style)tyle)
Jack for the umbilical cable to the junction boxJack for the umbilical cable to the junction box
    
  
    
The front panel of the junction box for the PSV model -H is shown inThe front panel of the junction box for the PSV model -H is shown in
fi
figugurere 3.3.55..

  LLEDED
The LThe LEDEDlights up when the junction box is correctly cabled to thelights up when the junction box is correctly cabled to the
controller and the key switch on the controller is turned to position I. Thecontroller and the key switch on the controller is turned to position I. The
LL
EDED
indicates that the junction box is ready to operate.indicates that the junction box is ready to operate.
 Control keys for theControl keys for the   , pan, pan
Using these keys the optional pan-tilt stage is panned Using these keys the optional pan-tilt stage is panned clockwise (clockwise (
→→
) or) or
anti-clockwanti-clockwise ise ((
←←
) (refer to) (refer tosec
sectiotionn 5.45.4). Alternatively it can be controlled). Alternatively it can be controlled
via the software as described in via the software as described in the software manual.the software manual.
 Control keys for theControl keys for the
  
, tilt, tilt
Using these keys the optional pan-tilt stage is tilted Using these keys the optional pan-tilt stage is tilted upward (upward (↑↑) or) or
downward (downward (
↓↓
) (refer to) (refer tosec
sectiotionn 5.45.4). Alternatively it can be controlled via). Alternatively it can be controlled via
the software as described in the software manual.the software as described in the software manual.
 TTL outputTTL output   (BNC jack)(BNC jack)
SynchronizatSynchronization pulse ion pulse for the for the generator signal.generator signal.


switch the beam shutter to the ON position when you are making measurements!switch the beam shutter to the ON position when you are making measurements!


This opening mustThis opening must be kept free to ensure sufficient cooling!be kept free to ensure sufficient cooling!
Figure 3.5: Front view of the junction box for the PSV model -HFigure 3.5: Front view of the junction box for the PSV model -H
  
  
  


   
   
     
 
 
  
  

  
  
  
 
    
           
  


       