Polytec PSV 300

To Next Page

To Previous Page



      

                

    

  

The back panel of the junction box for the PSV models -H, -F and -U is shownThe back panel of the junction box for the PSV models -H, -F and -U is shown

ininfi

figugurere 3.3.77..

      

Mains socket with built-in fuses. The mains voltage input is designed as aMains socket with built-in fuses. The mains voltage input is designed as a

wide range input.wide range input.



   

connector (industrial-stylconnector (industrial-style)e)

Jack for the umbilical cable to the scanning headJack for the umbilical cable to the scanning head

   connector (Sub-D jack)connector (Sub-D jack)

Jack for the interferometer cable to the Jack for the interferometer cable to the controllercontroller



  

connector (37-pin Sub-D jack)connector (37-pin Sub-D jack)

Jack for the DIOJack for the DIO// DAC cable to the workstatioDAC cable to the workstation to control the scannern to control the scanner

mirrors and the pan-tilt stagemirrors and the pan-tilt stage



   connector (SCSI-II type)connector (SCSI-II type)

Jack for the acquisition cable to the workstation to transmit bothJack for the acquisition cable to the workstation to transmit both

measurement and control signalsmeasurement and control signals

 Optional connectorsOptional connectors       (BNC jacks)(BNC jacks)

  Connectors for the Connectors for the generator cable to the workstation for thegenerator cable to the workstation for the

internal function generator (optional)internal function generator (optional)

    

Up to three BNC jacks can be made available for specialUp to three BNC jacks can be made available for special

applications.applications.



   

interface (9-pin Sub-D connector)interface (9-pin Sub-D connector)

Jack for the RS-232 cable to the workstation to control the video cameraJack for the RS-232 cable to the workstation to control the video camera

   output (BNC jack)output (BNC jack)

Jack for the video cable Jack for the video cable to transmit the video signal to to transmit the video signal to the workstationthe workstation

Figure 3.7: Rear view of the junction boxFigure 3.7: Rear view of the junction box



 

 



    















