Your boiler in brief:
For a proper functionality, it is important to:
• ensure always enough fuel in the operating bin of the boiler;
• use recommended fuel;
• follow the operating instructions.
What to do, if the boiler is not heating
- check whether the boiler is turned on (and what does it show on the display);
- check whether the boiler is running in an automatic mode (AUTO, MOD);
- check the amount of pellets in the bin;
- check whether the room thermostat is active (engaged);
- make sure that there is no error message on the screen (see chapter 7.3).
How to start the boiler (e.g. after interrupting the supply of pellets)
1. Restock pellets in the bin.
2. Check the burner - remove any ashes or unburned pellets from the burner surface.
3. Restock the fuel feeder F1 with pellets - according to the procedure on the next page of the manual.
4. Start the electric ignition - according to the procedure on the next side of the manual.
NEVER FORGET THAT:
• As the quality of the fuel used decreases, the user's comfort decreases as well.
• In order to ensure warm comfort, it is necessary to have not just a functional boiler but also a
FUNCTIONAL HEATING SYSTEM.
To Next Page
Loading...
