REV
(5):
Press this button to reverse the tape rapidly.
Press it again to return to playing speed. The radio will
play the last-selected station while the tape reverses.
You may select stations during
REV
operation by using
SEEK
or
TUNE.
FWD
(6):
Press this button
to
advance quickly to
another part of the tape. Press the button again to return
to playing speed. The radio will play the last-selected
station while the tape advances. You may select stations
during
FWD
operation by using SEEK
or
TUNE.
AM-FM:
Press this button
to
play the radio when a tape
is in the player.
TAPE/PLAY
Press this button to change to the tape
function
when
the
radio
is
on.
The
tape
symbol
with
an
arrow will appear on the display when the tape is active.
To
return to playing the radio, press the AM-FM button.
EJECT
Press this button
to
remove the tape. The
radio
will
play.
EJECT
may
be activated with either the
ignition or radio
off.
Cassettes may be loaded with the
radio
off
if
this button is pressed first. If you leave
a
cassette tape in the player while listening to the radio, il
may become warm.
CLN:
If this message appears on the display, the
cassette tape player needs to be cleaned. It will still play
tapes, but you should clean
it
as soon as possible to
prevent damage to the tapes and player. See “Care
of
Your Cassette Tape Player” in the Index. After you clean
the player, press and hold EJECT for five
seconds
to
reset the
CLN
indicator. The radio will display
---
to
show the indicator was reset.
CD
Adapter
Kits
It is possible to use a
CD
adapter kit with your cassette
tape player after activating the bypass feature
on
your
tape player.
To
activate the bypass feature, the ignition must be on.
Turn your radio
off.
Press
TAPE/PLAY
and
hold
for
three seconds. After three seconds, the tape symbol
in
the display will flash for two seconds indicating the
feature is active. Turn
the
radio on and insert
the adapter.
This override feature will remain active until EJECT
is pressed.
3-13
To Next Page
Loading...
Need help?
General
