While the tape
is
playing, use the
VOL,
FADE
and
BAL
controls just as you do for the radio. The display will
show
an
arrow
to
show which side
of
the tape is playing.
When the down indicator arrow is lit, selections listed
on the bottom side
of
the cassette are playing. When the
up arrow is lit, selections listed on
the
top side of the
cassette are playing. The tape player automatically
begins playing the other side when
it
reaches the end
of
the tape.
If
E
and a number appear on the radio display, the tape
won’t play because
of
an error.
E10:
The
tape is tight and the player can’t turn the
tape hubs. Remove the tape. Hold the tape with
the open end down and
try
to
turn the right hub
counterclockwise with
a
pencil, Turn the tape over
and repeat. If the hubs do not turn easily, your tape
may be damaged and should not be used
in
the
player. Try a new tape
to
make
sure
your player is
working properly.
Ell:
The tape is broken. Try a new tape.
If any error occurs repeatedly or if an error can’t be
corrected, please contact your dealer. If your radio
displays an error nuniber, write
it
down and provide
it
to
your dealer when reporting the problem.
PREY
(1):
Press this button or the SEEK down arrow
to
search for the previous selection on the tape. Your tape
must have at least three seconds
of
silence
between
ah
selection for PREV or
SEEK
to work. The tape direction
arrow blinks during
PREV
or SEEK operation. Press
PREV
or the SEEK down arrow to stop searching. The
sound will mute during
PREV
or
SEEK
operation.
NEXT
(2):
Press this button or the
SEEK
up arrow to
search for the next selection on the tape.
If
you hold the
button, the player will continue moving forward through
the tape. Your tape must have at least three seconds
of
silence between each selection
for
NEXT
or’SEEK
to
work. The tape direction arrow blinks during
NEXT
or
SEEK operation. Press
NEXT
or the
SEEK
up arrow
to
stop searching. The sound will mute during
NEXT
or
SEEK operation.
PROG
(3):
Press this button to play the other side
of
the tape.
on
(4):
Press this
button
to
reduce background noise.
Note that the double-D symbol will appear
on
the display,
Dolby00 Noise Reduction
is
manufactured under a
license from Dolby Laboratories Licensing Corporation.
Dolby and the double-D symbol
are
trademarks of
Dolby Laboratories Licensing Corporation.
3-12
To Next Page
Loading...
Need help?
General
