Page 12 www.poolpro.com.au
Ideal Summer settings: 6am - 10am and 4pm - 10pm (less hours for small pools,
more hours for extreme weather). Ideal Winter settings: See Winter Mode on page 14.
1. Press the shortcut button or enter Clock/Timer via the Main Menu.
2. Press to change between SINGLE CYCLE (chlorinator runs once per day) or
DUAL CYCLE (chlorinator runs twice per day).
3. Press to save the timer cycle and enter the timer program.
4. To set the ON/START time for TIMER 1:
“TIMER 1: ON TIME” will display on the LCD screen. The hours will ash on the
LCD screen. Press
or to adjust the hour. Press to save. The minutes
will ash. Press
or to adjust the minutes. Press to save and continue
to Step 5, or press
to go back to the hours and repeat Step 4. Press again
to exit without saving.
5. To set the OFF/STOP time for TIMER 1:
“TIMER 1: OFF TIME” will display on the LCD screen. The hours will ash on the
LCD screen. Press
or to adjust the hour. Press to save. The minutes
will ash. Press
or to adjust the minutes. Press to save and continue
to Step 6, or press
to go back to the hours and repeat Step 5. Press again
to exit without saving.
6. If you chose SINGLE CYCLE, you will be taken back to the Main Screen.
If you chose DUAL CYCLE, continue to the next step.
7. To set the ON/START time for TIMER 2:
“TIMER 2: ON TIME” will display on the LCD screen. The hours will ash on the
LCD screen. Press
or to adjust the hour. Press to save. The minutes
will ash. Press
or to adjust the minutes. Press to save and continue
to Step 8, or press
to go back to the hours and repeat Step 7. Press again
to exit without saving.
8. To set the OFF/STOP time for TIMER 2:
“TIMER 2: OFF TIME” will display on the LCD screen. The hours will ash on the
LCD screen. Press
or to adjust the hour. Press to save. The minutes
will ash. Press
or to adjust the minutes. Press to save and return to
the Main Screen or press
to go back to the hours and repeat Step 8. Press
again to exit without saving.
To Next Page