Pool Pro Neptune Series - Contrast; Power;Mode; Pump Setting; Salt Test

Page 13www.poolpro.com.au
CONTRAST
This function adjusts the contrast of the LCD screen.
1. Press the button to enter the Main Menu. Press or to scroll through the
menu. Press
to select Contrast.
2. Press or to adjust the contrast.
3. Press to save or press to exit without saving.
POWER/MODE
This function changes the operating mode of the chlorinator. Auto = running on the
timer settings. On = manually running, not using the timer settings. Off = Not running
manually or on the timer settings.
1. Press the button to change between AUTO, ON and OFF.
2. The mode can also be accessed via the main menu. Press the button to enter
the Main Menu. Press
or to scroll through the menu. Press to select
Power/Mode.
3. Press or to adjust the power/mode.
4. Press to save or press to exit without saving.
PUMP SETTING
This function protects the pool pump if there is no water ow. It adjusts the time that the
pump runs after the cell has detected that there is no water ow.
1. Press the button to enter the Main Menu. Press or to scroll through the
menu. Press
to select Pump Setting.
2. Press or to adjust the off time of the pump (3-10 minutes). The “OFF”
option disables this feature so the pump will NOT be turned off when there is no
water ow. The “OFF” option is ideal for pools with a ow switch or an external
pump control.
3. Press to save or press to exit without saving.
SALT TEST
This function measures the salt level in the pool water. This function is a guide only.
Have your pool water tested by your local Pool Pro Professional in order to add correct
levels of salt/minerals, depending on the test results.
1. Ensure the cell is clear of calcium deposits (which may affect test results).