Pop ProSet PB2500 - 9. Operation Test and Appearance Check; Operation Check; Appearance Check

24
9. Operation Test and Appearance check
Operation Check
Set 20 rivets of 4.8mm(3/16”) SSD-6*-BS and 10
rivets of 4.8mm(3/16”) AD-6*-ABS to check
followings:
 The tool does not slip
 Rivet setting is done in one stroke
 There is no protruding mandrels
 There is no abnormal noise
 The next rivet introduced to the front of the tool
is inserted smoothly.
 The jaws do not bite
 The waste mandrel is ejected to the Collector
 The collector shutter operates normally
(Open → Close)
Appearance check
 Any scratches on the housings
 Loose components and screws
 Any oil spots on the housings
 Peeling of the outer mold (Rubber grip)
Memo