3
©2016 STANLEY Black & Decker
All rights reserved.
The information provided may not be reproduced and/or made public in any way and through any means (electronically or
mechanically) without prior explicit and written permission from STANLEY Engineered Fastening. The information provided is based
on the data known at the moment of the introduction of this product. STANLEY Engineered Fastening pursues a policy of continuous
product improvement and therefore the products may be subject to change. The information provided is applicable to the product
as delivered by STANLEY Engineered Fastening. Therefore, STANLEY Engineered Fastening cannot be held liable for any damage
resulting from deviations from the original specifications of the product.
The information available has been composed with the utmost care. However, STANLEY Engineered Fastening will not accept any
liability with respect to any faults in the information nor for the consequences thereof. STANLEY Engineered Fastening will not
accept any liability for damage resulting from activities carried out by third parties. The working names, trade names, registered
trademarks, etc. used by STANLEY Engineered Fastening should not be considered as being free, pursuant to the legislation with
respect to the protection of trade marks.
CONTENT
1. Safety Definitions 4
1.1. GENERAL SAFETY 4
1.2. POWER TOOL USE AND CARE 4
1.3. IMPORTANT SAFETY INSTRUCTIONS FOR ALL BATTERY CHARGERS 5
1.4. IMPORTANT SAFETY INSTRUCTIONS FOR ALL BATTERY PACKS 6
1.5. SPECIFIC SAFETY INSTRUCTIONS FOR LITHIUM-ION (LI-ION) 7
1.6. RESIDUAL RISKS 7
1.7. LABELS AND ICONS 7
2. SPECIFICATIONS 8
2.1. TECHNICAL DATA 8
2.2. PLACING SPECIFICATIONS 10
2.3. PACKAGE CONTENTS 10
2.4. MAIN COMPONENTS LIST 11
2.5. OPTIONAL ACCESSORIES 11
3. Tool Use & Set up 12
4. Operating Instructions 12
4.1. NOSE EQUIPMENT 12
4.2. CHARGERS 13
4.3. BATTERY PACKS 14
5. Operating Procedure 14
5.1. Proper Hand Position 15
5.2. Tool Operation 15
6. Servicing the tool 16
6.1. Maintenance frequency 16
6.2. Cleaning 16
6.3. Spare Parts – Tools 17
6.4. Rechargeable Battery Pack 17
6.5. Protecting the Environment 17
7. Jaws, Jaw Guide, Jaw Pusher and Jaw Pusher Spring 18
8. SA Nose Housing and SA Nose Piece 22
9. Operation Test and Appearance check 24
10. Accessories 25
11. Exploded View 27
12. BOM 28
13. Troubleshooting Guide 34
To Next Page
Loading...