Pop ProSet PB2500 - 2. Specifications; 2.1. Technical Data

8
Read instruction manual before use.
Discard the battery pack with due care for the
environment.
Battery charging.
Do not incinerate the battery pack.
Battery charged.
Only for indoor use.
Hot/cold pack delay.
Your DeWALT charger is double insulated in
accordance withEN60335; therefore no earth
wire is required.
Do not charge damaged battery packs.
Do not expose to water.
Charge DeWALT/POP-Avdel battery packs only
with designated DeWALT/POP-Avdel chargers.
Charging battery packs other than the
designated DeWALT/POP-Avdel batteries with a
DeWALT/POP-Avdel charger may make them
burst or lead to other dangerous situations.
Have defective cords replaced
immediately.
Risk of electric shock.
STANLEY Engineered Fastening policy
is one of continuous product development and improvement
and we reserve the right to change the specification
of any product without prior notice.
2. SPECIFICATIONS
2.1. TECHNICAL DATA
2.1.1.
ProSet® PB2500
Voltage
V
18 nom/20 max
Type
1/2
Battery Type
Li-ion
Weight (without battery pack)
kg
1.35
Lpa (sound pressure)
dB(A)
74
Kpa (sound pressure uncertainty)
dB(A)
3
Lwa (sound power)
dB(A)
85
Kwa (sound power uncertainty)
dB(A)
3
Vibration total values (triax vector sum) determined according to EN 60745:
Vibration emission value ah
ah =
m/s2
< 2.5
Uncertainty K =
m/s2
1.5