Maintenance -
continued
To Store the Product Long Term
(more than 30 days)
If you do not intend to use the product for more than
one month, follow these steps to store the product
long term.
Drain all of the fuel from the tank into a container 1.
approved for petrol.
Run the engine until it stops.2.
Clean all foreign materials from the product.3.
Remove the spark plug boot and then the 4.
spark plug.
Pour approximately 5 ml oil into the cylinder 5.
through the spark plug hole.
Pull the recoil starter 2 or 3 times to distribute the 6.
oil over the cylinder walls.
Reinstall the spark plug. Follow the instructions 7.
for spark plug replacement to ensure
correct tightness.
Reconnect the spark plug boot.8.
Store the product in a well ventilated place that is 9.
inaccessible to children.
Note:
Keep the product away from corrosive agents such as
garden chemicals.
Important:
Abide by all federal and local regulations for the safe
storage, handling and disposal of petrol.
Spool Retainer
First String
Slot
Second String
Spool
Arrows on
Spool
Anchor Hole
First Spring
Spring
Spring
String Head
Slots
Eyelets
Shaft
Replacing the Cutting Line
Fig. 14
Fig. 15
Fig. 16
Fig. 17
16
To Next Page
Loading...
