24
Technical and Service manual
Porkka reserves the right to make product alterations at any time and can not be held responsible for any printing errors or omissions.
Inventus upright refrigerators and freezers
1. Lift up the evaporator box,
see page 13.
2. Replace the probe.
Use two cable ties and
insulation material.
(a)
1. Pivot the panel upwards
on it’s hinges until it
is secure, leaving the
machine compartment
open. Take care that the
panel will not fall back
and cause injury.
2. Replace the probe (a). Use
cable tie and insulation
material.
(a)
Probes, P2 defrost probe
Probes, P3 condenser probe
To Next Page
Loading...
