26
Not proof read yet!
Technical and Service manual
Porkka reserves the right to make product alterations at any time and can not be held responsible for any printing errors or omissions.
Inventus upright refrigerators and freezers
You will need a straight ball head allen key (4 mm), a sharp flat screw driver, a sheat-knife and a
hammer.
3. Lift the door off the lower hinge. Do not change
the angle.
2. Loosen the two hex screws in the upper hinge,
supporting the door with your foot
1. Open the door over 90 °C and carefully remove the
black sealing plugs on the other side with your
knife.
How to change the hinging of the solid door
To Next Page
Loading...
