27
Not proof read yet!
Technical and Service manual
Porkka reserves the right to make product alterations at any time and can not be held responsible for any printing errors or omissions.
Inventus upright refrigerators and freezers
4. Place the door steadily against the wall, the handle
being on the bottom side.
Carefully tap off the former upper hinge with a
hammer. Remove the lock counter bracket, too.
5. Install the former upper hinge and replace the lower
hinge by screwing it to its place. The hinge is
pretensioned, so be carefull not to release it. If
released, retension the spring as shown.
How to change the hinging of the solid door
To Next Page
Loading...
