EasyManuals Logo

Porsche Cayenne Turbo Driver Manual

Porsche Cayenne Turbo
367 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #254 background imageLoading...
Page #254 background image
254 Parking
Assigning garage door opener signal to
key with fixed code system
1. Please follow the operating instructions for the
original hand-held transmitter.
2. The standard codes set at the factory must be
deleted before programming for the first time.
3. Point the original transmitter at the marked
position.
4. Press the button of the original hand-held trans-
mitter and the button to be allocated on the
keypad simultaneously (see illustration).
5. Keep both buttons depressed until light-
emitting diode B starts to flash (first slowly and
then quickly).
Only release both buttons when light-emitting
diode B flashes quickly.
The rapidly flashing light-emitting diode B
confirms that the new signal has been
programmed successfully.
6. Repeat steps 3 to 5 to assign signals to the
other buttons.
Assigning garage door opener signal to
key with changeable code system
1. Please follow the operating instructions for the
original hand-held transmitter.
2. The standard codes set at the factory must be
deleted before programming for the first time.
3. Point the original transmitter at the marked
position.
4. Press the button of the original hand-held trans-
mitter and the button to be allocated on the
keypad simultaneously.
5. Keep both buttons depressed until light-
emitting diode B starts to flash (first slowly and
then quickly).
Only release both buttons when light-emitting
diode B flashes quickly.
The rapidly flashing light-emitting diode B
confirms that the new signal has been
programmed successfully.
6. To synchronise the system:
Press the programming button on the receiver
for the garage door drive.
Afterwards, you usually have approx.
30 seconds to initiate step 7.
7. Press the button to be assigned on the keypad
twice (for some devices you must press the
key on the keypad a third time to complete the
setting process).
8. Repeat steps 3 to 7 to assign signals to the
other buttons.
Note
f Please consult a Porsche partner if you have
not been able to successfully assign signals to
the buttons even though you have carefully
followed the instructions in this chapter and
the operating instructions for the original hand-
held transmitter. Your Porsche Partner has a
list of all garage door opener signals that can
be taught.

Table of Contents

Other manuals for Porsche Cayenne Turbo

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Porsche Cayenne Turbo and is the answer not in the manual?

Porsche Cayenne Turbo Specifications

General IconGeneral
BrandPorsche
ModelCayenne Turbo
CategoryAutomobile
LanguageEnglish

Related product manuals