Porsche PCCM Plus - PCCM Plus Configuration and System Reset; PCCM Plus Auto-Configuration Process; Version Info and Factory Reset Procedure

Car
4. Set the volume by pressing and
orbyturning the right-hand rotary knob
orvia the touchscreen.
Conguring PCCM Plus
For certain equipment features, such as the rear
view camera, vehicle type or antenna type, the
Porsche Classic Communication Management Plus
must perform a sequence in which the vehicle's
peripherals are checked and the Porsche Classic
Communication Management Plus is customised.
The sequence isnished when the antenna type has
been detected.
1. Press the
HOME
Car Set System
button.
2.
Select the Congure PCCM Plus menu option.
3.
Select the Auto-congure PCCM Plus menu
option.
4.
Select Start.
5.
Engage reverse gear.
6. Select OK.
Information
The teach-in function must be run when the Porsche
Classic Communication Management Plus is used
for the rst time so that the full range of functions
can be guaranteed.
To use the settings for Climate control memory,
Rain sensor, Rear wiper and Screen button in the
Individual Memory function, you must activate the
vehicle's equipment features manually. If your vehicle
has the equipment features automatic climate, rear
wiper, rain sensor or multi-function steering wheel,
proceed as follows to activate them:
1. Press the
HOME
Car Set button.
2.
Select the Congure PCCM Plus menu option.
– Select Automatic air conditioning ,
– or –
– Rear wiper ,
– or –
– Rain sensor ,
– or –
– Multifunctional steering wheel .
Information
The Individual Memory function is available only
forthe Porsche 911 (Type 997) / Boxster (Type
987) / Cayman (Type 987) vehicle models.
Version info
Select this menu option if you want to check the
current soware status of your Porsche Classic
Communication Management Plus,
1. Press the
HOME
Car Set System
button.
2.
Select the Version info menu option.
Information
To call up the version info of the navigation soware,
open the navigation menu provided separately
for

this purpose.
Factory reset
This function allows you to reset the Porsche Classic
Communication Management Plus to its status
ondelivery. All settings made aer this time will
bedeleted.
1. Press
HOME
Car Set System.
2.
Select the Factory reset menu option.
3.
Tap Reset.
34