To Next PageTo Next Page
Need help?Do you have a question about the Porter-Cable 4212 and is the answer not in the manual?
General safety rules for operating the tool.
Instructions for correctly positioning wood for symmetrical and tight-fitting joints.
Critical steps for setting the correct router bit depth for good-fitting joints.
Comprehensive guide to cutting through dovetails, including tails, pins, and troubleshooting.
Instructions for cutting and fitting half-blind dovetails, including troubleshooting.
Steps for cutting rabbeted half-blind dovetails and fitting.
General safety rules for operating the tool.
Instructions for correctly positioning wood for symmetrical and tight-fitting joints.
Critical steps for setting the correct router bit depth for good-fitting joints.
Comprehensive guide to cutting through dovetails, including tails, pins, and troubleshooting.
Instructions for cutting and fitting half-blind dovetails, including troubleshooting.
Steps for cutting rabbeted half-blind dovetails and fitting.
General| Type | Dovetail Jig |
|---|---|
| Max Dovetail Width | 1/2 inch |
| Max Dovetail Thickness | 1/2 inch |
| Capacity | 12 inches |
| Template Style | Through dovetail and half-blind dovetail templates |
| Compatible Router Base | Standard router bases (fits most routers) |
