Porter-Cable 630 - Page 18

No. 42054 Router Template Guide. For
Va" dovetails.
No. 43639 1 / 4 " H. S. Bit.
No. 42237 Lock Nut. For attaching tem¬
plate guides to router.
DOVETAIL TEMPLATE
An Easy-to-Use Guide For Cutting Per¬
fect Dovetail Joints. Handles Stock Up
to 12" Wide; y 16 " to 1" Thick. Cuts Vi”
Standard Dovetails and Rabbet Dove¬
tails.
Model 5008—Assembly required. In¬
cludes Template, Model 48Q16 Finger
Template, Operating manual and As¬
sembly Instructions.
ACCESSORIES
No. 42183 Dovetail Accessory Kit. In¬
cludes: 43640 Vz" Dovetail Bit, 42027
Router Template Guide and 42237 Nut.
No. 48016 Finger Template. For Vz"
dovetails.
No. 48029 Finger Template. For V 2 "
rabbet dovetails only.
No. 42027 Router Template Guide. For
V 2 " dovetails
No. 43640 H. S. Bit.
No. 43705 Carbide Bit.
No. 48021 Finger Template. For Va"
dovetails.
SPINDLES, ARBORS, ADAPTERS, BUSHINGS, GUIDES, COLLARS AND PILOTS FOR USE WITH
ROUTER BITS, CUTTERS
AND TRIMMERS
Solid Pilots. For high speed steel router
bits (Va "-28 thread).
No. 42237 Lock Nut. Used to attach all
templet guides to router bases.
Spindles. For use with shaper cutters.
Each equipped with necessary collars
and nuts (y 14 "-24 thread).
Model Shank Thread Spindle
No. Dla. In. Length In. Length In. Capacity In.
42195 Va 1%
43032 3/a V/u
42216 Va %
43741 Va 'Via
43738 Vi _'Vi6
’/l4
Vi
13/8
y.6
v*
3 /4
y4
21/4
iy 8
1 Va
Arbors. For use with screw-type router
bits (Va "-28 thread).
Model Shank Arbor
No. Dla. In. Length In.
43736 Va VVu
43274 % 1%
43737 _J4_ 2%
Shaper C ollars. _
Model Hole Outside Width
No. Dla. In. Dla. In. In.
42001 % Ve~
42004 y.4 % Va
42007 «4 % Va
42014 5 /i4 5 /b 3 /a
Model
Diameter
No. In.
42201
Vb
42204
Vi
42207 %
Solid Pilots. For carbide screw-type
router bits (#8-32 thread).
Ball Bearing.
Templet Guides — For use in pattern and
templet routing operations as listed.
Model No.
Purpose
Inside
Diam.
Outside
Diam.
42021
Stair Routing <1H»
thick treads)
lVfe' Wa ’
42024
Lock Face Routing
Va'
42027
Vi ’ Dovetailing and
General Routing
7 /l6*
42030
General Routing
i'
42033 General Routing
54'
42036
General Routing
%'
42039 Hinge Butt Routing
%'
42042
Hinge Butt Routing
%'
%'
42045
For use with Stanley
T-3 Templet
%'
H'
42048 For Hinges with Vs'
Corner Radius
1%' 1’%*'
42054
Vs ' Dovetailing
Va'
Via '
45101
Stair Routing (lVie*
thick treads)
1%*'
VAs 1
45102
Stair Routing (1'
Thick Treads)
VAa’
m r
ACCESSORY EQUIPMENT
No. 26793 Carrying Case— Heavy gauge
steel. Holds either Model 537, 536, 630,
670 or 690 Router and accessory parts.
No. 5043 — Magic Router Edge
Guide — Easy to mount adjustable
guides for accurate straight (or curved)
edge planing; parallel grooving,
dadoing or slotting operations. For
Models 537, 536, 350, 150, 100, 630,
670 and 690 Routers plus all other
Porter-Cable router models except the
Model 514, for applications where
critical accuracy and precision are
required.
Standard Router Edge Guides
No. 39120— F or Model 537
No. 42210— F or Model 536.
No. 42225— F or Model 514.
No. 42160— F or old Models 350 and 150,
and Models 100, 630, 670 and 690.
Adapters. To increase shank diameters
to fit various diameter router collets.
Model
No.
Diameters
Inside In. Outside In.
Length
In.
42106
Va
■ Va
1
42115
Va
Va
1 Va
42127
Va
Vi
m
42130
Via
1/2
11/4
42133
%
Vi
11/4
•40