H
Heather JonesJul 31, 2025
How to fix a Porter-Cable BSI550 Portable Generator that will not start?
- Jjessica97Jul 31, 2025
If your Porter-Cable Portable Generator engine won't start, there are several possible reasons. First, ensure that there is enough fuel or oil; add some if the levels are low. Second, check that the ignition switch is in the 'ON' position. Third, a faulty spark plug could be the cause, so try replacing it. Fourth, adjust the choke to the correct position. Fifth, make sure the fuel shut-off valve is open. Sixth, remove any load from the unit during start-up. Finally, check that the spark plug wire is securely attached to the spark plug.