EasyManua.ls Logo

Porter-Cable CH350CS - User Manual

Porter-Cable CH350CS
20 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Part No. D21269-007-0
Generators
Instruction
manual
To learn more about Porter-Cable
visit our website at:
http://www.porter-cable.com
The Model and Serial No. plate is located on the frame. Record
these numbers in the spaces below and retain for future reference.
Model No.
Type
Serial No.
ESPAÑOL: PÁGINA 21
FRANÇAISE: PAGE 41
IMPORTANT
Please make certain that the person who is to use this equipment
carefully reads and understands these instructions before starting
operations.
H650CS
H450CS
CH350CS
PROFESSIONAL POWER TOOLS
Copyright © 2000 PORTER-CABLE Corporation

Table of Contents

Questions and Answers

  • L
    Lori NelsonJul 30, 2025
    Why won't my Porter-Cable Portable Generator start?
    • M
      Matthew JacobsJul 30, 2025
      Your Porter-Cable Portable Generator might not start due to several reasons: it could be low on fuel or oil (add fuel or oil), the ignition switch might be in the "Off" position (turn it to "ON"), the spark plug could be faulty (replace spark plug), the choke might be in the wrong position (adjust accordingly), the fuel shut-off valve could be closed (open it), the unit might be loaded during start-up (remove the load), or the spark plug wire could be loose (attach it).
  • M
    Melissa GardnerAug 7, 2025
    What to do if my Porter-Cable Portable Generator has no electrical output?
    • L
      Lisa TownsendAug 7, 2025
      If your Porter-Cable Portable Generator has no electrical output, the issue could stem from a faulty receptacle (have Service Center replace), a tripped circuit breaker (depress and reset), a defective capacitor (have Service Center replace capacitor), a faulty power cord (repair or replace the cord), or a tripped GFCI switch breaker (depress and reset).
  • M
    mark70Aug 14, 2025
    Why does the circuit breaker keep tripping on my Porter-Cable Portable Generator?
    • K
      kevin30Aug 15, 2025
      Repeated circuit breaker tripping on your Porter-Cable Portable Generator is likely due to an overload (reduce the load). It may also be caused by faulty cords or equipment; check for damaged, bare, or frayed wires and replace if necessary.
  • I
    Isabel SmithAug 22, 2025
    What to do if my Porter-Cable Portable Generator is overheating?
    • L
      ltaylorAug 22, 2025
      If your Porter-Cable Portable Generator is overheating, it could be due to being overloaded (reduce load). Another potential cause is insufficient ventilation, so move the generator to a location with an adequate supply of fresh air.

Summary

ASSEMBLY

Obtaining Electricity from the Generator

Explains how to obtain electricity via extension cords or transfer switches.

Extension Cords

Double Throw Transfer Switch

BEFORE START UP

Pre-Operation Checks and Precautions

Essential checks and safety measures before starting the generator.

TROUBLESHOOTING GUIDE

Engine Start Issues

Common problems and corrections for engine not starting.

Electrical Output Problems

Troubleshooting no electrical output or repeated circuit breaker tripping.

Generator Overheating and Idle Issues

Solutions for generator overheating and no auto idle problems.

Porter-Cable CH350CS Specifications

General IconGeneral
BrandPorter-Cable
ModelCH350CS
CategoryPortable Generator
LanguageEnglish

Related product manuals