Porter-Cable DTE325 User Manual (English)

Questions and Answers:

T
Thomas MorganAug 11, 2025
Why won't my Porter-Cable Portable Generator start?
- S
  sheri31Aug 12, 2025
  Your Porter-Cable Portable Generator might not start due to several reasons: it could be low on fuel or oil (add fuel or oil), the ignition switch might be in the "Off" position (turn it to "ON"), there might be a faulty spark plug (replace spark plug), the choke might be in the wrong position (adjust accordingly), the fuel shut-off valve could be closed (open it), the unit might be loaded during start-up (remove the load), or the spark plug wire might be loose (attach it).
J
John MartinezAug 19, 2025
What to do if my Porter-Cable Portable Generator has no electrical output?
- R
  Roberta HahnSep 12, 2025
  If your Porter-Cable Portable Generator has no electrical output, the issue could stem from a faulty receptacle, which needs replacement by a service center. Alternatively, the circuit breaker might have tripped (depress and reset it), or there could be a defective capacitor, requiring service center replacement. A faulty power cord might also be the cause; in this case, repair or replace the cord.
M
mccoymeredithAug 26, 2025
Why does my Porter-Cable Portable Generator keep overheating?
- S
  Sheryl Porter PhDAug 27, 2025
  If your Porter-Cable Portable Generator is overheating, it could be due to being overloaded (reduce the load). Another possible cause is insufficient ventilation; move the generator to a location with an adequate supply of fresh air.
B
Brandon AcostaSep 3, 2025
What to do if my Porter-Cable Portable Generator circuit breaker keeps tripping?
- S
  Steven RoseSep 3, 2025
  Repeated circuit breaker tripping in your Porter-Cable Portable Generator can be caused by an overload (reduce the load). It can also be caused by faulty cords or equipment (check for damaged, bare, or frayed wires on equipment and replace if necessary).