To Next Page
C
Charles SmithJul 31, 2025
How to fix a Porter-Cable H1000 Portable Generator when the engine will not start?
- CcgatesJul 31, 2025
If your Porter-Cable Portable Generator's engine won't start, there are several potential causes: * The fuel or oil level might be low. Add fuel or oil. * The ignition switch might be in the "Off" position. Turn it to the "ON" position. * The spark plug could be faulty. Replace it. * The choke might be in the wrong position. Adjust it accordingly. * The fuel shut-off valve might be closed. Open it. * The unit might be loaded during start-up. Remove the load. * The spark plug wire might be loose. Attach it to the spark plug. * The fuel shut-off solenoid might be faulty. Have an Authorized Service Center replace it.
General
