Porter-Cable FR350B - Page 4

4 - ENG
         
     
Accidental discharge could result.
 
Loss of balance may cause personal injury.
(Fig. K)
         


 


Do not use the body of the tool or top cap
as a hammer. Discharged fasteners may follow unex-
pected path and cause injury. (Fig. L)
         
M)
    Maintenance  Repairs  


          
          
    

         
       
    Be aware that the nail may
follow the grain of the wood (shiner), causing it to protrude
unexpectedly from the side of the work material. Drive the
nail perpendicular to the grain to reduce risk of injury. (Fig. N)
      

      
(Fig. O)
 

          
        
        
        
         
(Fig. P)
 

    Be sure
the workpiece is properly secured before pressing the
nailer against the material.The contact trip may cause the
work material to shift unexpectedly. (Fig. Q)
          
         




