Porter-Cable PCB370SS

Questions and Answers

R
rebeccamaciasJul 30, 2025
What to do if the motor of my Porter-Cable PCB370SS Saw will not run?
- J
  Joyce CampbellJul 30, 2025
  If the motor of your Porter-Cable Saw won't run, several factors could be at play. First, a defective cord or plug might be the culprit, requiring replacement of the faulty parts before further use. Second, the motor itself might be defective, necessitating a call to a service center for qualified repair. Finally, a blown overload breaker could be the cause. To resolve this, push the on/off switch to the OFF position and allow the motor to cool.
A
Andrea JohnsonAug 7, 2025
Why are the blades breaking on my Porter-Cable PCB370SS Saw?
- V
  Veronica NashAug 8, 2025
  Breaking blades on your Porter-Cable Saw can stem from several issues. It could be due to incorrect blade tension, necessitating an adjustment. Blades may also break from overworking them, in which case you should reduce the feed rate. Using the wrong blade for the application, such as not using a narrow blade when needed, can also cause breakage. Twisting the blade in the wood, applying side pressure, can also lead to blade failure; avoid this.
P
Paul RoseAug 14, 2025
How to reduce excessive vibration in my Porter-Cable PCB370SS Saw?
- R
  Ryan AnthonyAug 14, 2025
  Excessive vibration in your Porter-Cable Saw can arise from several sources. Begin by ensuring the saw is properly mounted, consulting the mounting instructions for correct technique. An unsuitable mounting surface can also contribute; a heavier workbench, particularly one made of solid lumber, will reduce vibration more effectively than a plywood workbench. Check if the table is loose or resting against the motor, and if so, tighten the table lock knob. Lastly, ensure the motor mounting is secure by tightening the motor mounting screw.
B
bondmariaAug 21, 2025
What to do if there is a blade run out on my Porter-Cable PCB370SS?
- W
  William ThomasAug 22, 2025
  Blade run out on your Porter-Cable Saw may be due to misaligned blade holders. To correct this, loosen the blade holder lock screw that secures the blade holder to the arms. Adjust the position of the blade holders, then retighten the blade holder lock screw.

Summary

California Proposition 65

Health Hazard Warnings

Details chemicals known to cause cancer and reproductive harm in California.

Safety Guidelines and Definitions

Understanding Safety Icons

Explains the meaning of warning icons and safety alert symbols used in the manual.

Power Tool Safety

General Safety Instructions

Provides essential safety rules and precautions for operating any power tool.

Scroll Saw Safety

Specific Safety Instructions

Outlines critical safety measures specific to the operation of the scroll saw.

Electrical Requirements and Safety

Power Supply and Motor Specifications

Details voltage, amperage, and circuit requirements for safe operation.

Extension Cord Guidelines

Specifies the correct gauge and condition for extension cords to prevent hazards.

Tools and Carton Contents

Tools Needed for Assembly

Lists tools required for assembling the scroll saw and its stand.

Unpacking and Checking Contents

Provides instructions for unpacking parts and verifying the contents of the carton.

Know Your Scroll Saw

Component Identification

Illustrates and labels the key parts and controls of the scroll saw.

Glossary of Terms

Scroll Saw Terminology

Defines terms specific to scroll saws and their operation.

Woodworking Terms

Defines common woodworking terms relevant to scroll saw use.

Assembly and Adjustments

Installing the Stand

Step-by-step guide for assembling the scroll saw stand.

Mounting the Scroll Saw

Instructions on how to securely attach the scroll saw to its stand or workbench.

Blade Installation and Removal

Plain-End Blade Procedures

Covers the removal and installation of plain-end scroll saw blades.

Pin-End Blade Procedures

Details the steps for removing and installing pin-end scroll saw blades.

Saw Operation and Adjustments

Variable Speed Control

Explains how to adjust the speed for different materials and tasks.

On;Off Switch and Work Light

Describes the function of the main power switch and work light.

Overload Breaker

Information on the overload breaker and how to reset it.

Cutting Techniques and Recommendations

General Cutting Recommendations

Provides advice for achieving accurate cuts and maximizing blade life.

Freehand Cutting

Guide to performing freehand cuts on the scroll saw.

Angle Cutting

Instructions for setting up and performing cuts at an angle.

Rip or Straight Line Cutting

Method for making straight cuts using the scroll saw.

Interior Cutting

Steps for making cuts within a workpiece.

Maintenance and Care

General Maintenance Procedures

Routine cleaning and care instructions for the scroll saw.

Lubrication Information

Details regarding lubrication requirements for the tool.

Accessories and Troubleshooting

Available Accessories

Information on compatible accessories for the scroll saw.

Troubleshooting Common Issues

Solutions for common problems encountered during operation.

Parts List and Schematics

Parts List

A comprehensive list of all parts for the scroll saw.

Schematic Diagram

An exploded view illustrating the assembly of the scroll saw.

Stand Parts and Schematic

Lists parts and provides a schematic for the scroll saw stand.

Warranty Information

Limited Warranty Details

Explains the terms and duration of the product warranty.