Porter-Cable PCC790LA User Manual

Gracias por elegir PORTER-CABLE usted! Para registrar su nuevo producto,
visite: www.portercable.com / ServiceAndSupport / ProductRegistration.aspx
Merci d’avoir choisi PORTER-CABLE! Consulter le site Web www.portercable.com/
ServiceAndSupport/ProductRegistration.aspx pour enregistrer votre nouveau produit.
Thank you for choosing PORTER-CABLE! To register your new product, go to:
www.portercable.com/ServiceAndSupport/ProductRegistration.aspx
www.portercable.com
INSTRUCTIVO DE OPERACIÓN, CENTROS DE SERVICIO Y PÓLIZA DE GARANTÍA.
ADVERTENCIA: LÉASE ESTE INSTRUCTIVO ANTES
DE USAR EL PRODUCTO.
*Maximum initial battery pack voltage (measured without a workload) is 20 volts. The
nominal voltage is 18. *La tension initiale maximale du bloc-piles (mesurée sans charge
de travail) est de 20 volts. La tension nominale, mesurée avec une charge de travail, est
de 18 volts. *El máximo voltaje inicial del paquete de baterías (medido sin una carga de
trabajo) es 20 voltios. Si se mide con una carga de trabajo, el voltaje nominal es 18.
20V MAX* 18 GAUGE CORDLESS BRAD NAILER
*CLOUEUSE SANS FIL NO 18 20V MAX
CLAVADORA DE CLAVOS PEQUEÑOS
INALÁMBRICA DE CALIBRE 18 DE *20 V MÁX
CATALOG NUMBER
N° DE CATALOGUE
CATÁLOGO N°
PCC790
INSTRUCTION MANUAL
MANUEL D’INSTRUCTIONS
MANUAL DE’INSTRUCCIONES

Porter-Cable PCC790LA Specifications

General

Brand	Porter-Cable
Model	PCC790LA
Category	Nail Gun
Language	English

Summary

PORTER CABLE 20V MAX* 18 GAUGE CORDLESS BRAD NAILER

SAFETY GUIDELINES AND DEFINITIONS

Hazard Definitions

Defines DANGER, WARNING, CAUTION, and NOTICE symbols for hazard identification.

General Power Tool Safety Warnings

Provides overarching safety rules for power tool operation and personal protection.

ADDITIONAL NAILER SAFETY WARNINGS

Nailer Specific Safety Precautions

Key safety measures and warnings specific to operating a nailer.

Personal Protective Equipment (PPE)

Mandatory PPE requirements including eye, hearing, and respiratory protection.

Tool Handling and Operation Safety

Safe practices for handling, operating, and securing the nailer.

ADJUSTMENTS AND OPERATIONAL NOTES

Depth Adjustment Procedure

Instructions on how to adjust the fastener depth for desired penetration.

Safety Equipment and Chemical Warnings

Mandatory safety equipment and warnings regarding chemical exposure.

IMPORTANT SAFETY INSTRUCTIONS FOR BATTERY CHARGERS

Charger Safety and Handling

IMPORTANT SAFETY INSTRUCTIONS FOR BATTERY PACKS

Battery Pack Handling and Disposal

Safe practices for handling, using, and disposing of battery packs.

Charging and Environmental Precautions

Guidelines for charging batteries and precautions for environmental conditions.

TROUBLESHOOTING AND SPECIAL OPERATIONS

Clearing a Jammed Nail

Step-by-step guide to safely clear a jammed nail from the tool.

TROUBLESHOOTING GUIDE

Unit and Tool Actuation Issues

Troubleshooting steps for when the unit will not start or actuate.

Fastener Driving Problems

Solutions for issues related to fasteners not driving or driving improperly.

Battery and Charger Issues

Diagnosing and resolving problems with battery packs and chargers.

Unit Shutoff Issues

Troubleshooting steps when the unit shuts off abruptly during operation.