Need help?Do you have a question about the Porter-Cable PIN100 and is the answer not in the manual?
Details the compressed air requirements and system setup for the tool.
Describes the dual trigger system and fastener firing process.
Step-by-step guide to remove jammed fasteners from the tool.
Procedures for daily cleaning and visual inspection of the tool.
Guidelines for professional servicing and part replacement.
Details the compressed air requirements and system setup for the tool.
Describes the dual trigger system and fastener firing process.
Step-by-step guide to remove jammed fasteners from the tool.
Procedures for daily cleaning and visual inspection of the tool.
Guidelines for professional servicing and part replacement.
General| Type | Pneumatic |
|---|---|
| Fastener Length | 1/2 to 1 inch |
| Magazine Capacity | 100 |
| Air Consumption | 0.3 CFM |
| Power Source | Air |
| Fastener Gauge | 23 Gauge |
| Operating Pressure | 70 to 100 PSI |
To Next Page