PORTMAN EVO ELEMENT - Page 13

USER MANUAL
MENU
13 / 20
MODE 2 (5.1kHz)
MODE 3 (12kHz)
ORIENTATION
REGULAR
Sets up the pixel order relation. Auto mode discovers the
orientation of the fixture automatically and sets the first
pixel of the fixture on the top. Please refer to Orientation
chapter for more info
UPSIDE DOWN
DISPLAY AND BUTTONS
DP BRIGHTNESS
Changes the parameters of display and buttons highlight.
DISPLAY OFF TIME
WELCOME SCREEN
NO DMX BTN FLASH
RESET ALL TO DEFAULT
Resets all the options to default values.
WANNA GO
WIRELESS?
UNPAIR ALL WDMX
DEVICES
UNPAIRING MODE
Unpairs all connected WDMX transmitters
WDMX MODE
G3
Switches between WDMX modes
G4
G5
WDMX INFO
SIGNAL STRENGTH
Shows WDMX card info.
LINK STATUS
RDM STATUS
DMX DATA STATUS
INFO ABOUT
MYSELF
WHO MADE ME
Shows the name of the fixture’s manufacturer.
MY NAME IS
Shows the fixture’s name given by the manufacturer.
YOU CALL ME
Shows the fixture’s name given by the user.
MY ID IS
Shows the fixture’s RDM unique ID number.
MY VERSION IS
Shows actual firmware version
I WORKED HARD FOR
It Shows time the fixture has been turned on
CONTROL ME
MANUALLY
MAIN SOURCES
INTENSITY
0 – 100% BRIGHTNESS
Sets all main sources dimmer value
STROBE
0 - 100% STROBE
Sets all main sources strobe value
GLOW
INTENSITY
0 – 100% BRIGHTNESS
Sets glow all pixels dimmer value
RED
0 – 100% RED
Sets glow red value
GREEN
0 – 100% GREEN
Sets glow green value
BLUE
0 – 100% BLUE
Glow blue value
WHITE
0 – 100% WHITE
Glow white value
MACRO
MACRO
MACRO NUMBER SELECT
Selects macro
MACRO SPEED
MACRO SPEED
Sets the macro speed
MACRO INTENSITY
0 – 100% BRIGHTNESS
Sets macro intensity value
Orange values are editable.