Portwell RUBY-D718VG2AR - Page 41

RUBY-D718VG2AR
Copyright © Portwell 2016 RUBY-D718VG2AR User's Guide
41
Feature
Description
Options
Primary Display
Select which of IGFX/PEG/PCI Graphics device should be Primary Display Or select SG
for Switchable Gfx.
★Auto, IGFX, PEG,PCIE
Primary PCIE
Select Auto/PCIE1 of D28:F0,PCIE9 of D29:F1, Graphics device should be Primary PCIE
★Auto,PCIE1,PCIE9
Internal Graphics
Keep IGFX enabled based on the setup options.
★Auto, Disabled, Enabled.
GTT Size
Select the GTT Size
2MB,4MB, ★8MB
Aperture Size
Select the Aperture Size
128MB,★256MB,512MB,
1024MB,2048MB,4096MB
DVMT Pre-Allocated
Select DVMT 5.0 Pre-Allocated Graphics Memory size used by the Internal Graphics
Device.
★ 32M, 64M, 96M, 128M,
160M, 192M, 224M, 256M,
288M, 320M , 352M, 384M,
416M, 448M, 480M, 512M.
1024M,1536M,2048M…
DVMT Total Gfx Mem
Select DVMT5.0 Total Graphic Memory size used by the Internal Graphics Device.
128MB,★256MB, MAX.
Primay IGFX Boot Display
Select the Video Device which will be activated during POST. This has no effect if external
graphics present. Secondary boot display selection will appear based on your selection.
VGA modes will be supported only on primary display
★VBIOS Default, DVI,VGA,
HDMI.