Need help?Do you have a question about the POSIFLEX CD-3600 and is the answer not in the manual?
Resets scanner configuration to original factory settings, undoing all prior changes.
Allows changing between interfaces (e.g., USB HID, RS232) and resets settings.
Retrieves and displays the current firmware version installed on the reader.
Improves efficiency when scanning barcodes displayed on screens.
Sets the delay between transferring scanned data from the reader.
Specific settings and pin functions for the RS232 serial communication.
Configuration parameters for keyboard wedge and USB interfaces.
Selects which barcode symbologies the scanner can decode.
Configures fixed length checks for barcode data to ensure accuracy.
Adjusts decoding parameters for individual barcode symbologies.
Converts barcode data case to upper, lower, or exchanges it.
Configures data prefixes and suffixes for transmission.
Allows programming of specific keyboard key functions for configuration.
Enables direct input of numeric and alphabetic characters for settings.
Allows direct input of ASCII control characters for configuration.
Configures transmission of code identification and length.
Configures scanner operation modes like single, multiple, or continuous read.
Sets the duration the reader stays active after a scan or trigger.
Specifies scan repetitions for improved accuracy with poor quality labels.
Configures the scanner to read both black-on-white and white-on-black barcodes.
Adjusts scanner illumination and aiming light for optimal performance.
Prevents LED illumination flicker to improve barcode readability.
Controls the LED aiming light, including brightness and enablement.
Configures buzzer type, tone, duration, and loudness for audio feedback.
Controls the Good Read LED, allowing disabling or setting display durations.
Transmits scanner status and settings for diagnostic purposes.
Manages RS232 serial port settings and error message configurations.
Provides a flowchart for diagnosing and resolving scanner operational issues.
Defines common terms and acronyms used in barcode scanning technology.
To Next Page
General