Operating the Magnetic Stripe Reader (Optional)
To have the magnetic stripe reader of HS-3510W-E/3512W-E/3514W-E work
properly, you must bear in mind the following tips while swiping your MSR
cards through the reader.
1. Make sure to swipe your card with the side of magnetic stripe facing up.
2. Make sure to swipe your card along the track of the reader from left to
right or from right to left in the direction shown below.
Using the RFID Card Reader (Optional)
To retrieve data through the RFID card reader, tap your Mifare card against the
RFID reader as shown below.
To Next Page
Loading...
