Scanning Barcodes with Posilfex 2D Scanner (Optional)
The integrated Posiflex 2D Scanner is another prominent feature of HS-
3510W-E/3512W-E/3514W-E. With its hand-free design, it offers a more
convenient solution for users to read 1D/2D barcodes and then transmitted
scanned data to the terminal for further processing, which greatly increases
your working efficiency. By default, the scanner is set to Auto Trigger
operational mode.
Also, to adjust the scanning angle of the scanner, you may tilt the scanner up
and down as indicated in the figure below.
Using Fingerprint or iButton Sensors (Optional)
As for access control to your computer, two optional identification
mechanisms are provided and integrated in HS-3510W-E/3512W-E/3514W-
E: The fingerprint and iButton sensors. Either will work to verify an
individual’s identity.
In order to allow the fingerprint sensor to function normally, you have to
register your own finger first using Fingerprint Recognition Tool which is
pre-installed and accessible on your desktop of your system.
To Next Page
Loading...
