PP6000 Command Details - Page 5
Off 00 0 Cover is closed 2
On 04 4 Cover is open
Off 00 0 FEED button is used for macro execution 3
On 08 8 FEED button is used to feed the paper
4 On 10 16 Not used. Fixed to On
5 Off 00 0 Not used Fixed to Off
Off 00 0 No error 6
On 40 64 Error occurs
7 Off 00 0 Not used Fixed to Off
Bit 6: Errors indicated by this bit do not include cover open neither paper jam.
n =3: Error status
Bit
Hex Decimal
Function
0 Off 00 0 Not used. Fixed to Off
1 On 02 2 Not used. Fixed to On
2 - - - Undefined
Off 00 0 No auto-cutter error 3
On 08 8 Auto-cutter error occurs
4 On 10 16 Not used. Fixed to On
Off 00 0 No unrecoverable error 5
On 20 32 Unrecoverable error occurs
Off 00 0 No auto-recoverable error 6
On 40 64 Auto recoverable error occurs
7 Off 00 0 Not used. Fixed to Off
Bit 3: The auto cutter error together with cover open error, paper near end status,
paper end status and paper jams status are considered as recoverable errors. Because it
is possible to recover to non-errors status by correcting the cause of the error and
executing {DLE} {ENQ} n (1 ≤ n ≤ 2)
Bit 5:if an error due to improperly shut down or a circuit failure (e.g. wire break)
occurs, it is impossible to recover.
Bit 6:When printing is stopped due to high print head temperature until the print head
temperature drops sufficiently or when the paper roll cover is open during printing bit
6 is On.