Page 14
For FN probe models, the N mode is disabled in Fast Mode.
Reset
Restores factory settings and returns the Gage to a known condition. The following
occurs:
All batches, stored measurements, batch names and screen captures are erased.
Calibration adjustments and Cal Memory are cleared and returned to the Gage’s factory
settings. The factory calibration icon will appear on the display.
Menu settings are returned to the following:
Memory = OFF
Hi Res = OFF
Statistics Mode = OFF
HiLo Alarm = OFF
Scan Mode = OFF
Auto Dim = ON
Cal Lock = ON
Bluetooth & Stream = OFF
BLE Keyboard = OFF
WiFi & Access Point = OFF
USB Keyboard & Stream = OFF
Display = None
N Lock = OFF
Perform a more thorough Hard Reset by powering down the Gage, waiting several
seconds, then simultaneously holding both the center navigation and (+) buttons until
the Reset symbol appears. This returns the instrument to a known, out-of-the-box
condition. It performs the same function as a menu Reset with the addition of:
Bluetooth Pairing info is cleared. Menu settings are returned to the following status:
Units = Microns
Touch = ON
Flip Lock = OFF
Auto Sync .net = ON
Fast Mode = OFF
Sound = Medium
Language = English
Backlight = Normal
Battery Type = Alkaline
Bluetooth Smart = OFF
To Next Page
Loading...
Need help?
General
