Page 15
USB Drive = ON
NOTE:
Keep the Gage away from metal during a Reset. Date, Time and WiFi are not affected
by either Reset.
Units
Converts the displayed readings from inch to metric or vice versa. Stored
measurements in memory are not converted. Switching units will turn off Statistics, HiLo
Alarm and closes the current batch.
Battery Type
Selects the type of batteries used in the Gage from a choice of Alkaline, Lithium or
NiMH (nickel-metal hydride rechargeable). The battery state indicator symbol is
calibrated for the selected battery type. No damage will occur if the battery type used in
the Gage does not match the selected battery type.
Sound
Adjusts the volume of built-in speaker (Off, Low, Medium, High).
Touch
Allows the touch screen functionality to be disabled. All gage functions can also be
controlled using the navigation buttons.
Scan
By default, the PosiTector 6000 takes approximately 1 reading per second. Scan mode
allows the user to take multiple readings in rapid succession (3 readings per second)
without lifting the probe.
Choose from 3 Scan modes:
Normal - continuously measures when placed on the surface
Statistics - displays real-time scan statistics when placed on the surface. Average, max.,
min., and standard deviation are displayed.
To Next Page
Loading...
Need help?
General
