Page 3
Memory
The PosiTector 6000 Advanced has internal memory storage for recording
measurement data. Stored measurements can be reviewed on-screen or accessed via
computers, tablets and smart phones. Measurements are date and time-stamped. Store
up to 250,000 readings in up to 1,000 batches.
The memory icon appears and basic statistics are displayed when the Gage is set to
store measurement data.
NOTE:
Remove the last reading by pressing (-).
Open
Select a previously created batch or sub-batch to open and make it the active batch. If it
contains measurements, on-screen statistics will immediately reflect values calculated
from this batch. The calibration setting (i.e. Cal 1) associated with this batch is also
opened.
View
Use the Up or Down buttons to scroll through information, statistical summary, and a list
of each reading in the currently opened batch. Press the center navigation button to
exit.
Display
Choose between display options in the upper portion of the screen while taking
measurements.
Shortcut:
Press the Up button to scroll through the display options.
NOTE:
The Display option appears only if a batch is currently open.
Prompted Batch
Create pre-defined batches in PosiSoft Desktop with onscreen text and image prompts
for each reading, then upload to PosiTector 6000 gages. Ideal for ensuring a consistent
measurement pattern for repetitive jobs or when specific measurement locations are
To Next Page
Loading...
Need help?
General
