Page 5
Ensure printer is powered ON, paired with the Gage and within range, then select Print.
To cancel printing, press and hold the (-) and (+) buttons simultaneously.
For information on pairing, see www.defelsko.com/bluetooth
New Sub-Batch
Creates a new sub-batch within the currently opened batch. Sub-batching allows the
user to group related batches so that statistics can be accumulated for them. For
example, the main Batch (B1) would contain the statistics for it's sub-batches (ie. B1s1
and B1s2).
Shortcut: When a sub-batch is open, create a new sub-batch by pressing (+).
NOTE:
The New Sub-Batch option appears only if a batch is currently open.
New PA2
SSPC PA2 mode helps determine if film thickness over a large area conforms to user
specified min/max levels.
PA2 Setup
Adjust the PA2 parameters as necessary.
To adjust a parameter, use the Up and Down buttons to highlight the appropriate
parameter, then use the (-) and (+) buttons to adjust that parameter.
Detailed instructions available at: www.defelsko.com/PA2
New Batch
Closes any currently opened batch and creates a new batch name using the lowest
available number. For example, if only B1 and B3 exist, then B2 would be created and
made the current batch. Each measurement will be displayed and stored into this new
batch.
On screen statistics are immediately updated with each measurement. New batches are
date and time stamped when they are created.
Shortcut: When a batch is open, press (+) to create a new batch
NOTE:
To Next Page
Loading...
Need help?
General
