Page 6
Remove the last reading from the current open batch by pressing (-).
Close
Stops the recording process, closes the current batch, and removes batch information
from the display.
Delete
Removes a batch or sub-batch completely from memory. The name is deleted and all
measurements are erased. Sub-batches can be deleted individually. To delete all
related sub-batches, simply delete the top-level batch.
Delete Template
Removes Prompted Batch Template from the PosiTector body.
NOTE:
Deleting a Template from the PosiTector does not remove it from the PosiSoft Desktop
software.
New ISO 19840
Helps determines if a protective coating system complies with the ISO 19840
acceptance criteria for measuring coating thickness on rough substrates.
ISO 19840 Setup
Adjust the ISO 19840 parameters as necessary.
To adjust a parameter use the Up and Down buttons to highlight the appropriate
parameter, then use the (-) and (+) buttons to adjust that parameter.
Detailed instructions available at: www.defelsko.com/19480
Batch Summary
Displays a summary of all stored batches with the Batch Name, Probe Type and
Number of Readings listed for each batch.
To Next Page
Loading...
Need help?
General
