Available PosiTector 6000 Probes:
“Regular” - These constant-pressure, stainless
steel probes are hermetically sealed to be totally waterproof -
ideal for underwater use.
”Micro” - ideal for measuring small parts and
hard-to-reach areas. Available in 0, 45 or 90 degree angles.
”Thick” - ideal for thick, protective coatings.
“Xtreme” - ideal for measuring rough and hot surfaces up to 250°
C (500° F). Probe features an Alumina wear face and braided
cable.
For complete details, see:
http://www.defelsko.com/p6000/p6000_probe_details.htm
5
Additional PosiTector Probes:
The PosiTector accepts a number of probe types including
magnetic and eddy current coating thickness, surface profile,
environmental and ultrasonic wall thickness probes. Perform the
latest software Updates (pg. 33) to ensure probe compatibility with
your Gage. For the latest information on probe interchangeability
see www.defelsko.com/probes
Two Probe Styles
:
* Built-in - sensor protrudes from bottom of probe connector
* Separate - sensor is attached to the probe connector by a
1.2 meter (3 foot) cable.
(Extended cables lengths available.)
To Next Page
Loading...
Need help?
General
