To Next PageTo Next Page
Need help?Do you have a question about the Potterton assure combi 25 and is the answer not in the manual?
Building Regulations and the Benchmark Commissioning Checklist.
General safety instructions for boiler operation and user maintenance.
Key recommendations for installation, maintenance, and user guidance.
Specific safety instructions covering handling, lifting, and general use.
Outlines manufacturer, installer, and user liabilities.
Information for the installer of the Potterton Assure Combi boiler.
Details of related documentation and optional extras available.
Explanation of danger levels and symbols used throughout the manual.
List of abbreviations and glossary terms used in the document.
Details of directives, certifications, gas category, and relevant standards.
Nominal heat input, central heating, and domestic hot water specifications.
Physical dimensions, pipe connections, and required installation clearances.
Wiring diagram illustrating the boiler's electrical components and connections.
Overview of the Potterton Assure Combi boiler and its primary functions.
Explanation of the boiler's operation in central heating and hot water modes.
Identification and list of the key internal components of the boiler.
Description of the control panel, display symbols, and their meanings.
Contents of the boiler carton and included accessories.
List of optional accessories available for the boiler range.
General regulations and warnings that must be followed before installation.
Requirements for gas, electrical supply, water, and system setup.
Guidelines for selecting an appropriate and safe location for the boiler.
Instructions for safely transporting and handling the boiler unit.
Steps for unpacking the boiler and initial preparation for wall mounting.
Diagrams illustrating system filling and domestic hot water circuit connections.
General installation guidelines, safety, and warnings.
Steps for assembling the boiler and connecting external components.
Instructions for connecting the flue system and air supply components.
Detailed procedures for making the necessary electrical connections.
Procedures for flushing the system and filling the condensate trap.
General guidelines and references for boiler commissioning.
Preliminary electrical and system checks prior to commissioning.
Step-by-step commissioning process, including de-aeration function.
Checking gas pressure, gas rate, and combustion performance.
Procedures for configuring the system, including draining.
Handover procedure and user instructions for the installed boiler.
Explanation of the control panel, buttons, and display functions.
Procedure for starting up the boiler after installation.
Measures to protect the boiler and system from frost damage.
General safety warnings and recommendations for boiler maintenance.
Routine operations for annual servicing and component checks.
Detailed procedures for maintaining specific boiler components.
List of error codes and initial fault finding checks.
Troubleshooting guides for central heating and domestic hot water issues.
Steps to safely decommission and remove the boiler from service.
Guidelines for the correct disposal and recycling of the boiler.
List of available spare parts with their corresponding part numbers.
Checklist for demonstrating compliance with Building Regulations.
Forms for recording service history and maintenance performed.
General