Do you have a question about the Potterton Assure System Series and is the answer not in the manual?
Details about the Benchmark scheme and its importance.
General warnings and precautions for safe operation and maintenance.
Detailed safety instructions for handling the boiler.
Manufacturer, installer, and user liabilities.
Introduction to the manual's purpose and scope.
Explanation of danger, warning, and caution symbols.
List of abbreviations and glossary terms used in the document.
Details on safety, performance, quality, certifications, gas category, and standards.
Specific technical information and parameters for the boiler models.
Diagrams and specifications for boiler dimensions and required clearances.
Schematic diagram of the boiler's electrical connections and components.
Overview of the Potterton Assure System boilers and their capabilities.
Explanation of how the boiler functions, including air-gas adjustment and combustion.
Identification and list of the boiler's main components.
Explanation of the control panel layout and display symbols.
Contents of the boiler package upon delivery.
Available optional accessories for the boiler range.
Regulations and requirements for installing the boiler.
Specific requirements for gas supply, electrical supply, and system setup.
Installation and function of the safety pressure relief valve.
Guidelines for selecting a suitable location for the boiler installation.
Recommendations and methods for condensate discharge.
Guidelines for siting flue terminals, considering plume dispersal.
Steps for unpacking the boiler and initial site preparation.
General installation requirements and safety precautions.
Steps for assembling the boiler, including connecting taps and pipes.
Connecting the air supply and flue system to the boiler.
Procedures for making electrical connections to the boiler.
Steps for filling and flushing the heating system and condensate trap.
Pre-commissioning checks including electrical and system integrity.
Step-by-step guide for commissioning the boiler.
Procedures for checking gas pressure, rate, and combustion.
Final steps of handover and user instruction.
How to operate the boiler using its control panel and buttons.
Procedure for starting the boiler and its initial sequence.
How the boiler's frost protection works and its limitations.
General safety warnings and recommendations for boiler maintenance.
Routine inspection and maintenance tasks for annual servicing.
Detailed procedures for maintaining specific boiler components.
Procedure for replacing the gas valve.
Procedure for removing and replacing the complete pump assembly.
List of error codes displayed by the boiler and their meanings.
Step-by-step guides and flowcharts for diagnosing and resolving boiler faults.
Steps for safely decommissioning and removing the boiler.
Guidelines for the proper disposal and recycling of the boiler.
List of available spare parts with their part numbers.
Checklist to be completed by the installer for regulatory compliance.
Section for recording regular service and maintenance history.
Details specific to LPG models compared to natural gas versions.